Several years ago mom and I got into the “Bethany Reynolds” mode and we each made several Stack and Whack quilt tops. The funny thing about this quilt is that the feature fabric has pink and turquoise and roses. Three things I’m not fond of AT ALL! But I LOVE the quilt! Go figure.
So, you’ve done a Stack and Whack? They’re extremely addictive! And fun! Be forewarned if you’re just now deciding to give them a try.
Like I said, I made the quilt top several years ago, the only thing it still needed was the feature fabric outside borders. I laid it out, draped over my longarm and immediately knew I needed to add a 1″ finished green sashing fabric border first, something to straddle the quilt top and the outside border. Only problem: I didn’t have but a few small scraps of the fabric left. No selvage to give me fabric info, no idea where I bought it, who made it, etc, etc. What to do? What to do?
I took a small piece of the green and headed to GRS in Old Town Spring, TX. where I’m convinced they have or have carried every bolt of fabric known to man. Lo and behold… they had a Moda that almost matched perfectly. The original fabric is patterned, the new fabric isn’t but it’s the best I could come up with. Check it out much later in pictures way down below, you’ll see that after it’s quilted, it’s very hard to pick out the two greens.
So here’s the quilt top before quilting:
And here’s the first “star” block with the quilting underway. I lightly marked some quilting registration lines with Frixion Pen (yes I know, horrors, gasps, etc, I’ve heard it all.)
My goal starting out was to 1. quilt all 30 star blocks differently but with feathers as a central theme and 2. quilt vining feathers in the block sashings. So here goes, there are tons and tons of pictures:
Here’s a good pic of what I mean by vining feathers, the over and under as they wind their way up the sashing:
So can I tell you I was running out of quilting ideas by time I hit star number 23. I stuck with it and got through 30, but man-oh-man it was tough. From the picture below you can see that each of the background areas were quilting in the same fashion. I didn’t know what should go in each of the block four corners until all the stars were finished. I decided it needed two different sized of circles. I pulled out my “trusty awesome everybody should own a set” of Teryl Loy circle templates and viola! Perfect! Get the whole set! You’ll use them! You’ll thank me later! See how cool these are:
Each of the four corners got 7 circles and whew! I was finished with the body of the quilt top.
The little sashing cornerstones are also tiny Stack and Whack blocks. The only quilting I did in them was SID. You’ll see what I mean below when you come to the pictures of the quilt back.
I call this my quilt version of a hair ball: These are all the threads I clipped during the entire quilting process: As I clip I have a small fabric container that travels across the project with me. When I finish a quilt it gets upended into the trash. Don’t know what possessed me to dump them here and take a pic, guess I thought you needed to see all those threads!
So in my mind here’s where the quilt really shines: the back. I love love love to quilt and I love it even more when the back of the quilt is just as beautiful as the front. It is always my preference to use a solid fabric as by backings and mostly I gravitate towards medium weight muslin, either bleached or natural but in this case I had on hand a very light ivory with a tone on tone small floral spray. With all the quilting you really have to look hard to see the flowers.
I’m not going to talk about the back pictures, just hope you enjoy perusing through them:
Ok, I will talk about how I quilted the outside focus fabric borders. I marked an almost half way line down each border. In other words, if the border finished to 6″ I mark the line 3″ away from the inside seam line. Clear as mud? I need to remember that I will be taking a 1/4″ seam on the outer edge as I attach my binding. I prefer my feathers not touch or fall under the binding fabric. Am I always successful, sometimes… Anyway, once I had my 3″ line drawn, I then used a circle acrylic template and marked alternating half circles for the spine of my feathers to follow. I almost always do not stitch feather center spines. I let the individual feathers do that work. You’ll notice below that as I stitched the undulating feathers, at the “top” of each half circle, I incorporated an off shoot of feathers. It’s a nice way to quilt additional space and keep the feathers generally the same size. In other words, I didn’t have the need to quilt any long sweeping feathers to fill space. If this makes no sense at all, leave me a question in the comments section and I’ll try and draw out a diagram to go with my words.
Oh no! More words! Here’s a good pic below of the vining feathers. I had an overall plan. On the vertical sashings all the feather vines are headed up, on the horizontal sashings they begin on both the right side and the left side and meet up in the center.
Ok, I guess I had more to say about the back than I realized. See the star block below on the right, another example showing how I was able to use those AWESOME Teryl Loy circle templates to get those perfect lines of 6 half inch circles within the star and the 7 on the outside.
Whew! Look at that! Even the binding is on! If you know me well you’ll know I don’t care for the binding process whatsoever.
And what’s a blog without a picture of my black fur baby house panther! This is Winston and from what I can tell, he approves of my quilt!
Are you still with me? So, about the thread! I used Wonderfil Invisafil #112 light ivory throughout the entire quilt with the exception on the outside 1″ green border. On the green border I used Invisafil in a beautiful matching color. I love this thread! Haven’t tried it yet? Run out and get a spool or two or three! The bobbin? I used a white 70 weight poly throughout.
Batting? My fav, Hobbs white 80/20 on the bottom and Hobbs white Poly-Down on top. I love that combo!
About the binding, I used the same new green I went in search of. I like a small binding so I cut my strips 2″. I find it’s much easier to take a 1/4″ seam and fill the entire binding that way. It keeps me from getting judging comments that say something like: the binding could have been better….
Finished, this quilt measures 86×100. It’s larger than most of my more current work but I love the quilt and I love the size! I keep a very detailed journal of everything that I quilt. Oh, I quilt on a 26″ Innova with Lightening Stitch. Love my longarm! I logged 63 hours of quilting on this project!
This will be an entry in my guild show May 5-6th, wish me well!
Happy quilting and blessings,