So you want to make a handkerchief quilt with a custom drafted swag border!

img_60221.jpg

So you want to make a handkerchief quilt? There are so many different ways to use all those beautiful vintage hankies you’ve been collecting. I’m in the process of finishing my quilt top and want to share my progress. I’ve included a brief picture filled tutorial of sorts near the end of this blog if you’re wondering how to create a custom swag for your borders.

To start you need to decide how many blocks you’re wanting. I began with the idea of a 3 block by 4 block quilt top but quickly revised my plans to a 4 x 5. At this point I also decided I wanted a 6″ finished border on all sides.

Not all vintage handkerchiefs are the same size and not all are square. Once you’ve decided on the number of blocks, sort through your hankies and determine the size of the LARGEST handkerchief.

Do not determine your largest hankie until you have laundered, starched and pressed each one!!!

My largest hankie is 13 1/2″  and is pretty much square. This largest piece determines the bleached muslin block size for EVERY BLOCK going forward.  Before you do any cutting of your bleached muslin or solid white fabric you also need to think about how much of the white fabric you want to show around the sides of the handkerchief. I decided that I wanted 1/4″ to show around my largest hankie to I cut my muslin into  14 1/2″ squares.

Here’s the math: the hankie measures 13 1/2″. Add 1/4″ to show around hankie makes 14″ and seam allowances of 1/4″ each makes a 14 1/2″ unfinished block. With me so far?

 

img_60171.jpg

The smaller the hankie the more your white fabric will show.

IMG_6019

So it’s time to attach your hankies to your solid white background fabric. Note that I said “solid white” fabric. Hankies are thin and if you were to choose a print of some sort or even a white tone-on-tone fabric you will get unwanted shadowing and you will be sad.  I experimented with using both a straight stitch and a teeny tiny zig-zag stitch to attach the hankies. The zig-zag stitch looks nice but takes FOREVER!!!! Just warning you: you’ll be crazy sick of zigzagging around all those lovely tiny handkerchief scallops. Just do a medium length stitch super close to the hem of the hankie.

 

img_60161.jpg

Thread! You’ll probably know by now I’m a HUGE fan of Wonderfil Deco Bob and Invisafil. The Deco Bob is 80 weight, the other is 100. For this project I used the 100 weight Invisafil. It is wonderful as it crosses over different colors as it takes on the color beneath it. You couldn’t ask for a better thread!

So, the picture below shows all the handkerchiefs lined up like little soldiers. They’ve each been stitched into the 14 1/2″ white bleached muslin squares and with the help of my sweet friends at retreat, they are in the order for stitching. How did I decide on the order? I wanted the “visually heavier” handkerchiefs to hold the 4 corners. After that it was left up to how well they “played” with each other.

 

img_60211.jpg

About sashings: I knew I wanted soft pink sashings with the bleached muslin cornerstones. I chose a solid soft pink for the strips. Each sashing strip is cut 1 1/2″ by 14 1/2″. Each cornerstone is cut 1 1/2″ square. After seam allowances I will have a 1″x14″ pink sashing strip around each block and a 1″ finished white cornerstone.

 

IMG_6022

Sew your rows together first with a sashing strip both at the beginning and the end of each row of 4 hankies.

img_60402.jpg

After your rows are completed make a long sashing strip beginning with a white 1 1/2″ square followed by a pink strip, etc. etc.. Sew this long strip to the top of each of your rows of hankies. Remember, you’ll need to also sew one of these long strips to the bottom edge of your last hankie row.

img_60392.jpg

img_60382.jpg

Here’s a picture of the hankie rows sewn together and custom sized swags machine appliqued to the top border. My design wall placement didn’t allow me to get a picture of the entire quilt top.

 

IMG_6025 (Edited)(2)

So…how do you draft a custom swag for your quilt top borders? I’m giving you lots of pictures below in what I hope will be a good enough explanation for you to charge ahead!

You’re going to need a few tools:

  1. graph paper helps but is not mandatory
  2.  pencil
  3.  some sort of large curve tool and
  4.  some sort of circle(s) tool. I have some longarm clear acrylic templates I’ve used to help me with the large curves and a RAPIDESIGN® R-440 Template for my circles.
  5. a teflon pressing sheet
  6. freezer paper
  7. spray starch
  8. iron

The picture below shows a custom swag that will measure 12″ x approx. 5 1/2″ when finished. You’ll see I’ve drawn my first arc for my swag.

IMG_6089

I’ve shifted my set of oval templates up and will draw my second arc. Why do I have blue painters tape on my oval acrylic templates? First so I can keep them all held together and second so I can find them when they’re laying on fabric.

IMG_6090
RhondaDort.com 2017

Ok, so now we’ve drawn both the top and the bottom arc.

IMG_6091

It’s time to use our circle template to make the swag bumps.  Choose a circle size of your choice, paying attention to the circle side and top and bottom hash marks, place your circle on the top most arc, center your circle on your half way line and draw your half circle. The mechanical pencils below are pointing to the 3 important hash marks.  See how the circle is lined up on both the “half-way” mark for both the arc and the swag length line.

Warning!! Do not position your swag bumps (circles) so that they touch the top like of your drawing! Leave at least 1/4″ space!

img_60921.jpg

Here’s what your first swag bump will look like:

IMG_6093

For the placement of the remaining circles you can use the hash marks as your spacer between half circles.

IMG_6095

By time you reach both the right and left outer edges of your top arc, you may have to use the “fudge-factor” technique of swag bump placement. Just do what looks good to you.

Next step: you don’t want a straight line in between the bumps. You’ll need to free-hand a dip between the circles, either above or below the arc line. For this example I chose to place my dip below the arc.

IMG_6101

IMG_6099

It’s time to erase the pencil lines you don’t need any longer. And look what you’ve made, a custom sized swag pattern for your beautiful handkerchief quilt top border!

IMG_6103

If you’ve never made/used a freezer paper template before, well, you’re in for some fun! There are many methods you could use but this is what I do:

Iron three sheets of freezer paper together. The size of the three individual sheets needs to be a bit larger than your finished swag you just created. For the above sway my three freezer paper sheets would measure something like 13″ x 8″.

On your ironing surface, first step is to position your teflon pressing sheet. On top of the pressing sheet place one piece of freezer paper SHINY SIDE DOWN and without steam, lightly press. Repeat with the remaining 2 sheets, SHINY SIDE DOWN until you have a nice firm layer of three sheets. ***Important: let your newly created stack of papers cool! Give the stack 2 or 3 minutes before your proceed. Once cooled, slowly peel the freezer paper from the pressing sheet.

With scissors, cut out your graph paper swag on the pencil lines. With the freezer paper stack laying shiny side down, place your cut-out swag on the stack, trace around the swag edges and carefully cut out your new template. Smooth cut edges are key so take your time with this step. Be sure to keep your graph paper template in a safe place as you’ll need it if you need to make a 2nd or a 3rd freezer paper template.

Position your new freezer paper swag template on your fabric and with a medium temp. iron press it into place. The paper will stick to your fabric.

IMG_6107

IMG_6108

When it has cooled to the touch, trim around all edges leaving at minimum 1/4″.  Here’s what your cut out should look like:

IMG_6109

Using a rather heavy handed spray of the starch, make sure your fabric edges are a bit wet. Begin folding the top starched wet raw edge over the template and press into place.

IMG_6110

Here’s a pic of the top edge folded over and pressed:

IMG_6112

Important! At the inside dip of each of the swag bumps you’ll need to make 3 small snips to allow for the dip or the concave part of the template. Snip almost but not quite to the template edge.  Spray again with the starch and begin to slowly fold in and press these outer edges. Slow and steady all the while keeping your finger tips out of the way of your iron tip.

IMG_6115

This is what your swag will look like when all the edges are starched, folded over and pressed, you can snip away the little pointy parts at each end of the swag:

IMG_6117

Here’s what your swag will look like on the right side of the fabric:

IMG_6118

Here’s the scary part: you need to remove the freezer paper template. Find a spot on the smooth arc edge, carefully pry up the paper edge and pull it away from the swag. Yes, your edges will get rumpled but don’t worry! Once your paper is removed, lay your swag right side down, re-position your edges, give it a quick press with your iron if needed. Warning!!! Do not spray starch your swag at this point!!! You will lose most of your hard work!! (Ask me how I know…) If you feel you must starch again, do it when you flip your swag over to wrong side down/right side up!

IMG_6120

And you’ve just created your first custom sized swag for your handkerchief quilt top border! Congratulations!! Simple, easy and straight forward! How many freezer paper swag templates should you make? I usually make 2. These templates are used over and over again until they no longer stick to your fabrics. You’ll notice my template is brown in spots; that’s because I’ve used it maybe 10-15 times already.

IMG_6122

For this project I’ve chosen to machine applique with a tiny width zig-zag set at a medium to medium/long stitch once again using the fantastic Wonderfil Invisafil in white.

Are you ready to start your own vintage handkerchief quilt top? I feel like I used WAY too many words in this tutorial! Hope all the pictures help! Don’t be the slightest intimidated about drafting your own swag, once you’ve done one you’re a pro and well on your way to a fantastic quilt border!

Happy quilting,

Rhonda

ps: Please-oh-please use the comments section to post your questions! If you’re wondering about something, chances are so are lots of other people!

 

image

8 thoughts on “So you want to make a handkerchief quilt with a custom drafted swag border!

  1. I have a lot of vintage hankies and had hoped to make a quilt with them someday. I never quite knew where to start but your tutorial is so great that I feel as though I have all the info I need to make the quilt now. Thank you for a wonderful tutorial with wonderful pictures!

    Liked by 1 person

  2. No, no, no – never too many words. This is the best tutorial I think I’ve ever read and certainly ‘the best’ when it comes to making a handkerchief quilt AND designing a swag! I’ve had a number of heirloom handkerchiefs and always thought they’d make a great quilt but your tut has made me realize it’s possible to create a gorgeous quilt. Yours is wonderful. Do you plan to do the quilting yourself? No matter what, I hope you’ll keep us updated with the progress of this lovely quilt. I just recently found your blog and my only regret is that I haven’t been following for a long time. Thanks, Rhonda.

    Liked by 1 person

  3. you’ve taken making a handkerchief quilt to a whole new level. it is beautiful and it will be gorgeous when you are done. I’ve always loved handkerchiefs, my grandmother always carried one and I do too. thanks for sharing your process!

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s